




Introduction
The Sonic 185 EP glider combines it all. The model is made of a special foam material-EPO, that is more crash resistant and reinforced where needed with carbonfibre rods. The model is controlled over 3 axis that makes it very manouvrable. The overall flying characteristics of the Sonic 185 are forgiving and extremely stable. Very good gliding performance and even aerobatics are possible. The installed brushless motor in combination with the folding propeller guarantees extreme climbing rates and power all time
Specifications
| Model No. | DY8929 |
| Model Name | Sonic 185 glider |
| Material | EPO Foam |
| Wing Span | 1850mm(72.8in) |
| Flying Weight | 980g |
| Wing Loading | N/A |
| Fuselage Length | 1090mm(42.9in) |
| CG | 55 - 65mm from the leading edge of the wing at the root |
| Motor | Detrum BM3512A-KV1200 |
| ESC | TC Skylord 30A ESC |
| Propeller | Folding prop 9*5 |
| Servo | 4x 9g |
| Elevator | Yes |
| Rudder | Yes |
| Ailerons | Yes |
| Flaps | No |
| Landing Gear | N/A |
| EDF | N/A |
| Floats | N/A |
| Tx Requirement | 6 Channel or above transmitter |
| Rx Requirement | 6 Channel Receiver |
| Li-Po Battery | 11.1V 1800mAh 20C |
| Appr. Assembly Time | 1 hour |
| Aircraft Type | Gliders |
| Pilot Level | beginner |
| Appr. Flight Time | 15min |








Copyright © 2009-2019 DetrumTech, Co,.Ltd All Rights Reserved